Effects of novel bioactive glasses on promoting remineralization of artificial dentin caries / 北京大学学报(医学版)

OBJECTIVE@#To investigate the effects of novel bioactive glasses (BG) including PSC with high phosphorus component and FBG with fluorine-doped element on promoting remineralization of artificial dentin caries.@*METHODS@#(1) BGs were used in this study as follows: PSC (10.8%P2O5-54.2%SiO2-35.0%CaO, mol.%) were synthesized using phytic acid as the phosphorus precursor through sol-gel method. FBG (6.1%P2O5-37.0%SiO2-53.9%CaO-3.0%CaF2, mol.%) and 45S5(6.0%P2O5-45.0%SiO2-24.5%CaO-24.5%Na2O, mol.%) were synthesized by traditional melt method. (2) The above BGs were soaked in simulated body fluid (SBF) for 24 hours. Then X-ray diffraction (XRD) was used to analyze the formation of hydroxyapatite (HA) crystals. (3) Prepared 1 mm thick dentin slices were soaked in 17% ethylene diamine tetraacetic acid (EDTA) for 1 week to demineralize the dentin. Then the dentin slices treated by BG were soaked in SBF for 1 week. Field emission scanning electron micro-scopy (FE-SEM) was used to observe the surface morphology of the dentin slices. (4) Four cavities were prepared to 1 mm depth in each 2 mm thick dentin slice, then were treated with lactic acid for 2 weeks to form the artificial dentin caries. Wax, mineral trioxide aggregate (MTA), PSC and FBG were used to fill four cavities as blank control group, MTA group, PSC group and FBG group respectively. Then the spe-cimens were soaked in SBF for 4 weeks. The changes of depth and density of demineralized dentin were analyzed using Micro-CT before filling and after 2 and 4 weeks filling.@*RESULTS@#(1) PSC and FBG promoted mineral formation on the surfaces of the demineralized dentin. And the speed was faster and crystallinity was higher in PSC group than the FBG and 45S5 groups. (2) The increased mineral density of artificial dentin caries in PSC group were (185.98 ± 55.66) mg/cm3 and (213.64 ± 36.01) mg/cm3 2 and 4 weeks after filling respectively, which were significantly higher than the control group [(20.38 ± 7.55) mg/cm3, P=0.006; (36.46 ± 10.79) mg/cm3, P=0.001]. At meanwhile, PSC group was also higher than MTA group [(57.29 ± 10.09) mg/cm3; (111.02 ± 22.06) mg/cm3], and it had statistical difference (P=0.015; P=0.006). The depth of remineralized dentin in PSC group were (40.0 ± 16.9) μm and (54.5 ± 17.8) μm 2 and 4 weeks respectively, which were also statistically different from the control group (P =0.010;P=0.001). There were no statistical differences between the control group and MTA group. The above effects of FBG group were between PSC and MTA.@*CONCLUSION@#PSC has advantages in the speed, quality and depth of mineral deposition in the demineralized layer of artificial dentin caries. It would be expected to be an ideal material to promote the remineralization of dentin caries.

Efeito de dentifrícios com alta concentração de flúor na remineralização de substrato dentário com cárie artificial / Effect of toothpaste with high fluoride concentration on remineralization of dental substrate with artificial caries

Introduction: fluoride toothpaste is widely used by the population. Objective: dentifrices with a high concentration of sodium fluoride and the presence of tricalcium phosphate were developed, providing additional protection to patients vulnerable to the development of caries. This study aimed to evaluate the influence of different dentifrices on the surface and internal hardness and enamel wear after artificial caries, pH cycling, and toothbrushing. Material and method: enamel blocks (4x4 mm) were obtained from 20 bovine teeth. The specimens were submitted to artificial caries lesion and then to pH cycling and brushing according to the dentifrice: Colgate Total 12 and Clinpro + Tricalcium Phosphate. Result: after this period, they were submitted to analysis of superficial and internal hardness and profilometry. Scanning Electron Microscopy (SEM) was performed. The data obtained were evaluated by one-way Analysis of Variance (ANOVA) to evaluate the mineral recovery and profilometry, and two-way repeated measures ANOVA to evaluate the superficial and internal hardness. Conclusion: analyzing the surface hardness, after caries induction, there was a significant reduction in hardness that was partially recovered regardless of the dentifrice used. For internal hardness, Clinpro obtained lower values on the control side and up to 90 micrometers on the test side. As for profilometry, Colgate Total 12 showed greater wear when compared to Clinpro. It was concluded that Clinpro promoted lower internal hardness, however, Colgate Total 12 resulted in greater surface wear of tooth enamel.

Introdução: dentifrícios fluoretados são amplamente utilizados pela população. Foram desenvolvidos dentifrícios com alta concentração de fluoreto de sódio e presença de tricálcio fosfato, fornecendo proteção adicional a pacientes vulneráveis ao desenvolvimento da cárie. Objetivo: o objetivo deste estudo foi avaliar a influência de diferentes dentifrícios na dureza superficial, interna e desgaste do esmalte após cárie artificial, ciclagem de pH e escovação. Material e método: blocos de esmalte (4x4 mm) foram obtidos a partir de 20 dentes bovinos. Os espécimes foram submetidos à lesão de cárie artificial e, em seguida, à ciclagem de pH e escovação de acordo com o dentifrício: Colgate Total 12 e Clinpro + Tricálcio Fosfato. Após este período, foram submetidos à análise de dureza superficial e interna e perfilometria. Foi realizada microscopia eletrônica de varredura. Resultado: os dados obtidos foram avaliados por ANOVA um critério para avaliar a recuperação mineral e perfilometria, ANOVA dois critérios medidas repetidas para avaliar a dureza superficial e interna. Conclusão: analisando a dureza superficial, após a indução da cárie houve uma redução significativa na dureza que foi parcialmente recuperada independente do dentifrício utilizado. Para dureza interna, Clinpro obteve valores menores no lado controle e até 90 micrômetros no lado teste. Quanto à perfilometria, o Colgate Total 12 apresentou maior desgaste quando comparado ao Clinpro. Concluiu-se que Clinpro promoveu menor dureza interna, porém, o Colgate Total 12 resultou em maior desgaste superficial do esmalte dentário.

Effect of phenylmethylsulfonyl fluoride, a protease inhibitor, on enamel surface remineralization

Phenylmethylsulfonyl fluoride (PMSF) is a protease inhibitor widely used in research, but fluoride is released during its action and this knowledge has been neglected in dental research. Aim: to evaluate if fluoride released by salivary protease action on PMSF affects enamel remineralization and fluoride uptake. Methods: Groups of 10 enamel slabs, with caries-like lesions and known surface hardness (SH), were subjected to one of the following treatment groups: Stimulated human saliva (SHS), negative control; SHS containing 1.0 µg F/mL (NaF), positive control; and SHS containing 10, 50 or 100 µM PMSF. The slabs were subjected to a pH-cycling regimen consisting of 22 h/day in each treatment solution and 2 h/day in a demineralizing solution. After 12 days, SH was again measured to calculate the percentage of surface hardness recovery (%SHR), followed by enamel fluoride uptake determination. The time-related fluoride release from 100.0 µM PMSF by SHS action was also determined. Data were analyzed by ANOVA followed by Newman-Keuls test. Results: The release of fluoride from PMSF by SHS was rapid, reaching a maximum value after 10 min. Fluoride released from PMSF was more effective in enhancing %SHR and increasing fluoride uptake in enamel compared with SHS alone (p < 0.05); furthermore, it was equivalent to the positive control (p > 0.05). Conclusion: In conclusion, fluoride released by saliva from PMSF is available to react with enamel and needs to be taken into account in research using this protease inhibitor

Potencial remineralizante del fluoruro diamino de plata al 38% en dentina de dientes temporales afectada por caries / Remineralizing potential of 38% silver diamine fluoride in dentin affected by dental caries

Introducción: la caries es una enfermedad compleja que afecta a cualquier edad. La prevalencia es mayor en la primera dentición, sobre todo en población con baja percepción económica. El fluoruro diamino de plata (FDP) al 38% ha sido utilizado como una alter- nativa de tratamiento para esta enfermedad. Funciona como una solución remineralizante y cariostática. Objetivo: evaluar el efecto remineralizante del FDP al 38% en dentina afectada por lesiones de caries en molares temporales. Material y métodos: estudio clínico, epidemiológico, descriptivo, longitudinal y experimental. Se llevó a cabo en molares de primera dentición de niños de tres a cinco años de edad. Los niños seleccionados tenían molares con lesiones cariosas dentinarias, Pitts las denomina D3. No se incluyeron niños con dientes que presentaron patologías pulpares irreversibles. La aplicación del FDP al 38% la efectuó un operador entrenado para esta finalidad. Se utilizaron los criterios de Nyvad para determinar el grado de dureza de la dentina y con ello deducir su remineraliza- ción. Se observó la permanencia de la remineralización efectuada por un periodo de cinco meses. Resultado y conclusión: el FDP es un compuesto eficaz en 91% de los casos en un periodo de cinco meses o más (AU)

Introduction: dental caries is a complex disease that affects any age. The prevalence is higher in primary dentition, especially in a population with low economic perception. 38% silver diamine fluoride (FDP) has been used as an alternative treatment for this disease. It works as a remineralizing and cariostatic solution. Objective: to evaluate the remineralizing effect of 38% FDP on dentin affected by dental caries, in temporary molars. Material and methods: clinical, epidemiological, descriptive, longitudinal and experimental study. It was carried out in temporary molars of children between three and five years of age. The selected children presented molars with dental carious lesions, Pitts calls them D3. Children with teeth that presented irreversible pulp pathologies were not included. The application of the FDP to 38% was carried out by an operator trained for this purpose. The Nyvad criteria were used to determine the degree of hardness of the dentin and thereby deduce its remineralization. The permanence of the remineralization carried out was observed for a period of five months. Result and conclusion: the FDP is an effective compound in 91% of the cases, in a period of five months or more (AU)

Prevalencia de mancha blanca en dentición temporaria en el Hospital de Odontología Infantil Don Benito Quinquela Martín / Prevalence of white spot in temporary dentition at Don Benito Quinquela Martin Children's Dentistry Hospital

Introducción: La caries dental es una enfermedad infecciosa y multifactorial, que co- mienza por una desmineralización del esmalte producida por la acción de ácidos generados por bacterias presentes en el biofilm dental. Estas lesiones se inician como manchas blancas (MB) y es el único estadio de la caries dental capaz de ser revertido mediante la aplicación profesional de agentes remineralizantes, por lo que es fundamental la detección y tratamiento temprano de las mismas. Objetivo: Determinar la prevalencia de manchas blancas en la dentición temporaria de los niños atendidos en el Servicio de Clínica y Orientación del Hospital de Odontología Infantil (HOI) «Don Benito Quinquela Martín¼. Materiales y métodos: Se evaluó una muestra de 94 niños con dentición temporaria, en el Servicio de Clínica y Orientación del HOI, teniendo en cuenta los ingresos y reingresos, durante el período comprendido entre septiembre de 2019 y febrero de 2020. Resultados: La prevalencia de manchas blancas de un total de 94 niños evaluados fue del 55 %. De los pacientes que presentaron MB, el 59 % fue de sexo masculino y el 41 % de sexo femenino. La media de edad fue de 4.77 años. De los pacientes atendidos, 73 concurrieron por primera vez y 21 pacientes fueron reingresos. Conclusión: La prevalencia de manchas blancas en la muestra evaluada de niños atendidos en el Servicio de Clínica y Orientación del HOI fue del 55 %. Este resultado sugiere la necesidad de continuar y potenciar la promoción de la salud bucal, no solo como herramienta estratégica para brindar conocimientos acerca de los beneficios de una correcta higiene oral y una dieta saludable, sino también como factor de prevención en cuanto a la aparición de lesiones de caries y posteriores consecuencias adversas (AU)

Introduction: Dental caries is an infectious and multifactorial disease that begins with the demineralization of the enamel produced by the action of acids generated by bacteria in the dental biofilm. These lesions start as white spots (WS), and it's the only stage of dental caries capable of being reverted by the professional application of remineralizing agents. Hence, its early detection and treatment are essential. Objective: To determine the prevalence of white spots in the temporary dentition of children treated at the Clinical and Orientation Service of "Don Benito Quinquela Martin" Children's Dentistry Hospital (CDH). Materials and methods: A sample of 94 children with temporary dentition was evaluated on admission and readmission at CDH's Clinical and Orientation Service between September 2019 and February 2020. Results: The prevalence of WS in 94 children evaluated was 55%: 59% of patients who presented WS were males, and 41% were females. The mean age was 4.77 years. Seventy-three patients seen attended for the first time, and the other 21 were readmissions. Conclusion: The prevalence of WS in children who attended CDH's Clinical and Orientation Service was relevant. This result indicates that we must continue and enhance oral health promotion as a strategy to give knowledge about good oral hygiene benefits, a healthy diet, and to prevent the appearance of caries lesions and subsequent consequences (AU)

Efeito de géis fluoretados suplementados com trimetafosfato de sódio nanoparticulado sobre a remineralização do esmalte dental in situ / Effect of fluoride gels supplemented with nanosized sodium trimetaphosphate on enamel remineralization in situ

O objetivo do presente estudo foi avaliar o efeito de géis fluoretados suplementados com nanopartículas de Trimetafosfato de Sódio (TMP) sobre a remineralização de lesões de cárie artificiais in situ. Blocos de esmalte dental bovino (n=160) foram aleatoriamente divididos entre os grupos de estudo após análise de dureza de superfície (DS) e indução de lesões de subsuperfície. Os géis testados foram: Placebo (sem flúor ou TMP ­ controle negativo), 9000 µg F/g (9000F ­ controle positivo), 4500 µg F/g + 5% TMP microparticulado (4500 5%TMPmicro) e 4500 µg F/g + 5% TMP nanoparticulado (4500 5%TMPnano). Dez voluntários utilizaram dispositivos palatinos contendo 4 blocos de esmalte durante 3 dias, após uma única aplicação dos géis, seguindo um protocolo duplo-cego e cruzado. Dois blocos de esmalte foram removidos imediatamente após a aplicação dos géis, para determinar a concentração de fluoreto de cálcio (CaF2) formado. Após cada fase, determinou-se a porcentagem de recuperação de dureza de superfície (%RDS) e CaF2 retido no esmalte. Os dados foram submetidos ANOVA de medidas repetidas e teste de Student-Newman-Keuls (p< 0.05). A maior %RDS foi observada para o gel 4500 5%TMPnano, seguido por 4500 5%TMPmicro, 9000F e Placebo, com diferenças significativas entre os grupos. Em relação ao CaF2 formado, a maior concentração foi observada para o grupo 9000F. Não foram observadas diferenças significativas entre os grupos 9000F, 4500 5%TMPmicro e 4500 5%TMPnano para concentrações de CaF2 retido. Conclui-se que a adição de TMP a géis fluoretados melhorou significativamente a remineralização de lesões de cárie in situ. O uso de TMP em escala nanométrica potencializou ainda mais este efeito(AU)

The present study aimed to evaluate the effect of fluoride gels supplemented with nano-sized sodium trimetaphosphate (TMP) on the remineralization of artificial caries lesions in situ. Bovine enamel blocks (n=160) were randomly distributed among study groups after surface microhardness (SH) analysis and induction of subsurface lesions. Test groups included: Placebo (without F and TMP ­ negative control), 9000 µg F/g (9000F ­ positive control), 4500 µg F/g + 5% micrometric TMP (4500 5%+ TMPmicro) and 4500 µg F/g + 5% nano-sized TMP (4500 + 5%TMPnano). Ten volunteers used palatal devices containing 4 enamel blocks during 3 days, after a single application of gels, following a double-blind and crossover protocol. Two enamel blocks were removed immediately after topical application of F to determine calcium fluoride (CaF2) formed on enamel. After each phase, the samples were analyzed by percentage of surface hardness recovery (%SHR) and CaF2 retained on enamel. Data were analyzed by repeated-measures ANOVA and Student-NewmanKeuls test (p< 0.05). The highest %SHR was observed for 4500 5%TMPnano gel, following by 4500 5%TPMmicro, 9000F, and Placebo, with significant differences among all groups. Regarding CaF2 formed, the highest concentration was observed in the 9000F group. No significant differences were observed among 9000F, 4500 5%TMPmicro and 4500 5%TMPnano groups for concentrations of CaF2 retained. It was concluded that the addition of TMP to gels improved the remineralization of caries lesions in situ. The use of nano-sized TMP further enhanced this effect(AU)

Efficacy of 30% and 38% Silver Diamine Fluoride in Arresting Caries Lesions After Different Application Times: An in Vitro Study

Abstract Objective: To evaluate the efficacy of silver diamine fluoride (SDF) in arresting dentin caries lesions when applied under different concentrations and times. Material and Methods: Forty-two bovine blocks were selected and fixed in 24-well plates. Each well received a mixed bacterial inoculum added to the culture medium with 5% sucrose. The plates were incubated in microaerophilia (7 days) for caries formation, confirmed by micro-CT (M1). SDF was applied over the carious lesions for different times and concentrations (n=6): SDF 30% - immediate removal, 1 minute and 3 minutes; SDF 38%, - immediate removal, 1 minute and 3 minutes. The group without treatment was the control. Then, the samples were again scanned by micro-CT (M2) and submitted to a second cariogenic challenge for 21 days. Then, a final scan was performed (M3). Results: Mean pH at the culture medium and lesion depth were compared using Kruskal-Wallis and Wilcoxon tests. 38% SDF showed the lowest metabolic activity of the biofilm. All 38% groups and 30% 1 and 3 minutes did not show an increase in mean lesion depth comparing M3 with M1. However, only 30% 3 minutes and 38% 1 and 3 minutes showed a significant reduction of lesion depth. Conclusion: The minimum application time of 30% SDF to arrest dentin caries lesion was 1 minute, while 38% SDF arrested with application and immediate removal.

Effectiveness of Chewing Gum Containing CPP-ACP for Remineralisation of Demineralised Enamel around Orthodontic Brackets: An in Situ Study

Abstract Objective: To evaluate the effectiveness of chewing gums containing CPP-ACP in remineralisation of demineralised enamel around orthodontic brackets. Material and Methods: Enamel blocks from 120 bovine incisors were used. The blocks were flattened and polished, followed by the development of incipient subsurface caries. The blocks have been subjected to a baseline microhardness analysis. Orthodontic brackets were bonded to the exposed area of the blocks, reserving an area for hardness analysis. An in situ crossover (three-way crossover phases of 21 days with an interval of one week between them), controlled, randomised and blind experimental model was used, with the participation of 12 volunteers divided into groups: G1 - negative control group, without chewing gum; G2 - conventional sugar-free chewing gum, without CPP-ACP (placebo); and G3 - sugar-free chewing gum with CPP-ACP. The following parameters were analysed: superficial linear (Ra), volumetric roughness (Sa), and superficial structural loss, which was indicated by Gap measurement (difference between the healthy and treated area). Statistical tests used were the Friedman, Wilcoxon and Shapiro-Wilk, Kruskal Wallis' nonparametric tests and ANOVA. Results: There was a significant reduction in enamel microhardness after demineralisation in all the groups (p<0.05). This deleterious effect was attenuated in the three groups after the final evaluation, although there were no statistical differences (p<0.05); however, the final values did not return to the baseline values (p<0.05). Conclusion: Chewing gum containing CPP-ACP did not promote in situ remineralisation of demineralised enamel around orthodontic brackets.

Biomateriales que inducen la remineralización del esmalte dental y dentina / Biomaterials that induce remineralization of the dentin and enamel surface

Desde los sesentas, con la invención del vidrio bioactivo, los tratamientos de remineralización se han popularizado entre los cirujanos dentistas y su utilización es cada vez mayor; la remineralización, en conjunto con las adecuadas medidas de higiene preventiva, representa uno de los mejores abordajes mínimamente invasivos y a un costo comparativamente bajo. Este estudio documental tiene por objetivo establecer una mejor comprensión del uso clínico de los biomateriales que inducen la remineralización de la superficie del esmalte dental y dentina. Se realizó una exploración utilizando motores de búsqueda (bases de datos en PubMed, Medigraphic, y Science Direct). El proceso de localización de los estudios relevantes se efectuó introduciendo palabras clave como: silicatos de calcio, fosfopéptidos de caseína-fosfato de calcio amorfo, remineralización, esmalte y dentina, incluyéndose en el procedimiento artículos de antigüedad no superior a siete años, en español e inglés, publicados en revistas científicas aprobadas por pares.Actualmente, no es posible remineralizar del todo la estructura dentaria, por lo cual, en un futuro cercano, los esfuerzos de la odontología de remineralización deben apuntar al desarrollo de agentes biomiméticos inteligentes que restauren al cien por ciento la estructura dental perdida (AU)

Since the sixties, with the invention of bioactive glass, remineralization treatments have become popular among dental surgeons. Their usage is increasing; remineralization, in conjunction with appropriate preventive hygiene measures, represents one of the best minimally invasive treatments at a relatively low cost. This documentary study aims to establish a better understanding of the clinical use of biomaterials that induce remineralization of the surface of teeth enamel and dentin. A search was conducted using search engines (PubMed and Medigraphic databases, and Science Direct). The search process for the relevant studies was carried out by introducing keywords such as calcium silicates, phosphopeptides of amorphous calcium casein-phosphate, remineralization, enamel and dentin, including in the search articles no older than seven years in Spanish and English published in scientific reviewed journals. Currently, it is not possible to completely remineralize the dentary structure so, in the near future, remineralization dentistry efforts should aim to develop (AU)

Clinical performance of a micro invasive treatment based on demineralization-remineralization for dental fluorosis: case report

Introduction: Dental fluorosis manifests clinically as white to brown spots on the enamel teeth that were exposed to excessive fluoride during the formation process. Esthetic treatments were described in the literature to reduce or eliminate the fluorotic stains on the enamel surface. Objective: The aim of this study is to present an alternative treatment for fluorosis-stained teeth. Case report: This case report describes the clinical performance of a treatment of a 12-year-old male patient whose teeth presented moderate fluorosis. This treatment is based on tooth demineralization and remineralization. The material has an acid phase made by hydrochloric acid with tricarboxylic acid, and an alkaline phase made by Calcium Hydroxide. Results: This pain less and fast treatment presented good results. The treatment eliminated the spots during the follow-up and preserved most of the dental structure, improving the appearance of the patient's teeth. Conclusion: The appearance of the treated enamel showed a surface almost completely free of fluorotic stains, demonstrating the satisfactory results of this treatment.

Introdução: A fluorose dentária manifesta-se clinicamente como manchas brancas a marrons no esmalte de dentes expostos ao excesso de flúor durante o processo de formação. Tratamentos estéticos foram descritos na literatura para reduzir ou eliminar as manchas fluoróticas na superfície do esmalte. Objetivo: Apresentar uma alternativa de tratamento para dentes manchados por fluorose dentária. Relato do caso: Este relato de caso descreve o desempenho clínico do tratamento para dentes com fluorose moderada em um paciente de 12 anos. Esse tratamento foi baseado numa técnica de desmineralização e remineralização do dente. O material possui uma fase ácida composta por ácido clorídrico com ácido tricarboxílico, e uma fase alcalina composta por Hidróxido de Cálcio. Resultados: Observou-se que esse tratamento, sem dor e rápido, apresentou resultados satisfatórios, pois eliminou as manchas durante o acompanhamento. Além disso, preservou ao máximo a estrutura dentária, beneficiando o paciente com uma melhor aparência dos seus dentes. Conclusão: O aspecto do esmalte tratado mostrou uma superfície quase sem manchas fluoróticas, demonstrando resultados satisfatórios deste tratamento.

Análise in vitro da capacidade de soluções contendo fluoreto e/ou trimetafosfato na remineralização da dentina e na inibição da atividade de metaloproteinases da matriz dentinária / In vitro analysis of the capacity of solutions containing fluoride and/or trimetaphosphate in the remineralization of dentin and in the inhibition of the activity of dentin matrix metalloproteinases

Objetivo: O objetivo deste estudo foi investigar o potencial anti-proteolítico contra MMP-2 e MMP-9 e a capacidade de induzir a remineralização da dentina, através de soluções contendo diferentes concentrações de TMP (na sua forma cíclica), diferentes concentrações de F e associação TMP/F. Métodos: Blocos de dentina radicular (6mmx4mmx2mm, n = 130) foram selecionados e divididos aleatoriamente em 13 grupos/soluções experimentais (n = 10): 1) Placebo (sem F/TMP); 2) 0,3% TMP hidrolisado; 3) 1% TMP hidrolisado; 4) 3% TMP hidrolisado; 5) 0,3% TMP; 6) 1% TMP; 7) 3% TMP; 8) 250 ppm F; 9 500 ppm F; 10) 1100 ppm F; 11) 250 ppm F associado a 0,3% TMP; 12) 500 ppm F associado a 1% TMP e 13) 1100 ppm F associado a 3% TMP. A avaliação do potencial anti-proteolítico das soluções experimentais contra as metaloproteinases da matriz dentinária (- 2 e -9) foi realizado por meio da análise zimográfica. Para as análises mecânicas, três áreas foram determinadas para cada espécime: 1- controle (sem tratamento); 2- desmineralizado (cárie artificial); 3- tratado (desmineralizado e submetido a ciclagem de pH por 7 dias, e tratado por 1 min com as soluções experimentais). Os espécimes de dentina foram analisados quanto à porcentagem de recuperação de dureza superficial (%SHR), em dureza transversal (%CSHR) e por microtomografia computadorizada (IMC). Para os dados de dureza e Micro-CT, os resultados foram analisados por ANOVA de medidas repetidas seguida do teste de Student-Newman-Keuls (p <0,05). Resultados: A análise zimográfica mostrou que 1100 ppm F + 3% de TMP promoveu inibição completa da atividade gelatinolítica (MMP-2; MMP-9). Os grupos com TMP não hidrolisados apresentaram efeito remineralizador (% SHR e % CSHR) superior aos grupos hidrolisados. O grupo 1100F + TMP promoveu a maior %SHR e %CSHR entre todos os grupos (p <0,001), sendo respectivamente 15,4 e 10,5%, superior ao grupo 1100F. Os grupos contendo 1100F e 1100F + 3%TMP apresentaram maior concentração mineral. Conclusão: Com base nos resultados, 3% TMP atua como um agente antiproteolítico contra metaloproteinases da matriz dentinária. Além disso, quando suplementado com 1100F, 3% TMP potencializa a remineralização, aumentando significativamente as propriedades mecânicas da dentina tratada. Os tratamentos com TMP não hidrolisado e associado ao F maior que as soluções fluoretadas sem o TMP. Significância clínica: Dessa forma, uma potencial estratégia preventiva e terapêutica pode ser considerada na clínica odontológica, principalmente na terapia da cárie radicular, como também para método preventivo de lesões iniciais de cárie dentinária ou no pré-tratamento da dentina, utilizando-os como agentes cross-linker em procedimentos restauradores(AU)

Objective: The aim of this study was to investigate the anti-proteolytic potential against MMP-2 and MMP-9 and the ability to induce dentin remineralization, through solutions containing different concentrations of TMP (in its cyclic form), different concentrations of F and TMP / F association. Methods: Root dentin blocks (6mmx4mmx2mm, n = 130) were selected and randomly divided into 13 groups / experimental solutions (n = 10): 1) Placebo (without F / TMP); 2) 0.3% hydrolyzed TMP; 3) 1% hydrolyzed TMP; 4) 3% hydrolyzed TMP; 5) 0.3% TMP; 6) 1% TMP; 7) 3% TMP; 8) 250 ppm F; 9,500 ppm F; 10) 1100 ppm F; 11) 250 ppm F associated with 0.3% TMP; 12) 500 ppm F associated with 1% TMP and 13) 1100 ppm F associated with 3% TMP. The evaluation of the antiproteolytic potential of experimental solutions against dentin matrix metalloproteinases (- 2 and -9) was carried out by means of zymographic analysis. For mechanical analysis, three areas were determined for each specimen: 1- control (without treatment); 2- demineralized (artificial caries); 3- treated (demineralized and subjected to pH cycling for 7 days, and treated for 1 min with the experimental solutions). The dentin specimens were analyzed for the percentage of recovery of superficial hardness (% SHR), in crosssectional hardness (% CSHR) and by computed microtomography (∆IMC). For the hardness and Micro-CT data, the results were analyzed by repeated measures ANOVA followed by the Student-Newman-Keuls test (p <0.05). Results: The zymographic analysis showed that 1100 ppm F + 3% TMP promoted complete inhibition of gelatinolytic activity (MMP-2; MMP-9). The groups with non-hydrolyzed TMP showed a remineralizing effect (% SHR and % CSHR) superior to the hydrolyzed groups. The 1100F + TMP group promoted the highest % SHR and % CSHR among all groups (p <0.001), being 15.4 and 10.5%, respectively, higher than the 1100F group. The groups containing 1100F and 1100F + 3% TMP showed higher mineral concentration. Conclusion: Based on the results, 3% TMP acts as an antiproteolytic agent against dentinal matrix metalloproteinases. In addition, when supplemented with 1100F, 3% TMP enhances remineralization, significantly increasing the mechanical properties of the treated dentin. Treatments with non-hydrolyzed TMP and associated with F greater than fluoridated solutions without TMP. Clinical significance: Thus, a potential preventive and therapeutic strategy can be considered in the dental clinic, mainly in the treatment of root caries, as well as for the preventive method of initial lesions of dental caries or in the pretreatment of dentin, using them as agents cross-linker in restorative procedures(AU)

Avaliação do efeito protetor, remineralizante e antimicrobiano de dentifrícios contendo partículas bioativas / Evaluation of protective, remineralizing and antimicrobial effect of toothpastes containing bioactive particles

O objetivo deste trabalho foi avaliar o potencial protetor contra a desmineralização e o efeito remineralizante de dentifrícios experimentais contendo diferentes concentrações de partículas de vidro ionomérico pré-reagido (S-PRG - surface prereacted glass ionomer cement). Adicionalmente, o potencial antimicrobiano foi avaliado. Foram preparados 168 espécimes cilíndricos (4mm - diâmetro; 2mm - altura) de esmalte bovino hígido e polido para avaliação do potencial protetor (n=84) e remineralizante (n=84). Estes foram estratificados nos seguintes grupos de tratamento (n=12), de acordo com a concentração das partículas bioativas (S-PGR) incorporadas nos dentifrícios: 0%; 1%; 5%; 20% e 30%. Um dentifrício contendo NaF (1450 µg F/mL) foi utilizado como controle positivo e a água ultrapurificada foi utilizada como controle negativo. Os tratamentos com as suspensões de dentifrícios (1:3 com saliva artificial) foram realizados 2x/dia ­ 5 min/8 dias, intercalados com a ciclagem des/remineralizante. Para avaliação do potencial protetor dos tratamentos contra a desmineralização, os espécimes foram imersos em solução desmineralizante por 4 h e em solução remineralizante por 20 h. Para a avaliação do potencial remineralizante dos dentifrícios, os espécimes foram submetidos à formação de lesão de mancha branca artificial em solução desmineralizante por 20 h e então foram submetidos aos mesmos tratamentos e ciclagem des/re (2 h em solução des e 22 h em solução re). Após a ciclagem, os espécimes foram analisados quanto a dureza superficial, subsuperficial. Adicionalmente, o pH da suspensão de dentifrício preparada em água destilada foi determinado. A avaliação do efeito dos dentifrícios sobre a adesão bacteriana e crescimento do biofilme foi realizada por meio de testes em uma cepa padrão de S. mutans (UA159) e em uma cepa clínica de S mutans. Para cada cepa, 35 espécimes de esmalte bovino polido (6mm - diâmetro; 2mm - altura) foram distribuídos aleatoriamente nos mesmos grupos de tratamento (n=5), porém para a avaliação do efeito antimicrobiano, um dentifrício contendo 1450 µg F/mL + triclosan foi utilizado como controle positivo. Os espécimes foram tratados com as suspensões (5 min) e então inseridos em uma placa contendo sacarose, saliva artificial e uma suspensão S. mutans (padrão e clínica) para permitir a formação do biofilme. Então, foi realizada a contagem de unidades formadoras de colônias por mL (UFC/mL) após 48 h. O efeito antimicrobiano sobre um biofilme recém-formado e maduro também foi avaliado. Para isso, 35 blocos de esmalte bovino foram distribuídos aleatoriamente nos sete grupos citados anteriormente (n=5). Os espécimes foram inseridos em uma placa contendo sacarose, saliva artificial e uma suspensão S. mutans para permitir a adesão bacteriana. Após 4 h e 24 h da formação inicial do biofilme, os espécimes foram tratados com um dos dentifrícios contendo diferentes concentrações de S-PRG e controles e retornaram ao meio de cultura. Após 48 h, a contagem de UFC/mL foi realizada. Análises estatísticas independentes foram realizadas entre os grupos para cada estudo. Os dados foram analisados com ANOVA e teste de Tukey (5%). Os dentifrícios contendo S-PRG apresentaram potencial protetor contra a desmineralização e o dentifrício com 30% S-PRG foi o mais eficaz, diferindo do controle positivo (p<0,05). Para a remineralização, dentifrícios contendo S-PRG diferiram do controle negativo (p<0,05), mas não diferiram entre si e não foram superiores ao dentifrício contendo NaF. Uma diminuição significativa na adesão de microrganismos foi observada para todos os grupos tratados com os dentifrícios contendo S-PRG e para a cepa UA159 os dentifrícios com 20 e 30%S-PRG apresentaram efeito superior ao dentifrício contendo NaF+Triclosan (p<0,05). Efeito antimicrobiano sobre o biofilme recém-formado (4 h) também foi observado para os grupos tratados com dentifrícios contendo S-PRG, mas não foi observado efeito superior ao dentifrício contendo NaF+Triclosan (p>0,05). Para o biofilme maduro, efeito antimicrobiano dos dentifrícios contendo S-PRG foi observado apenas para a cepa clínica (p<0.05), sendo inferior ao exercido pelo controle positivo. Concluiu-se que os dentifrícios contendo S-PRG apresentam capacidade de proteger o esmalte contra a desmineralização, bem como capacidade remineralizante, além de serem capazes de impedir a adesão bacteriana e atuar sobre o crescimento do biofilme cariogênico.

The aim of the present study was to evaluate the protective, remineralizing, and antimicrobial potential of experimental toothpastes containing different concentrations of pre-reacted glass ionomer particles (S-PRG). Cylindrical specimens (n=84, 4mm- diameter, 2mm-height) of sound and polished bovine enamel were prepared to evaluate the protective and remineralizing potential of the toothpastes. These were stratified into the following treatment groups (n=12), according to the concentration of bioactive particles (S-PGR) incorporated to the toothpastes: 0%; 1%; 5%; 20%; and 30%. A toothpaste containing 1450 µg F/mL was used as a positive control and distilled water as a negative control. Treatments with toothpastes' slurries (1:3 with artificial saliva) were performed 2x/day - 5 min / 8 days, interposed with de/remineralization cycling. To evaluate the protective potential of the toothpastes, specimens were immersed in demineralizing solution for 4 h and in a remineralizing solution for 20 h. To evaluate the remineralizing potential of toothpastes, the specimens were submitted to the formation of white spot lesion in demineralizing solution for 20 h and then submitted to the same treatments de- and remineralizing pH-cycling (2 h in de- and 22 h in remineralizing solution). Specimens were analysed for surface and cross-sectional hardness. Additionally, the pH of the slurries prepared in deionized water was assessed. The effect of toothpastes over microorganisms adhesion and their antimicrobial potential over a newly formed and mature biofilms were also evaluated. To evaluate the effect of toothpastes on microorganisms adhesion and biofilm development, two different studies were performed using a S mutans strain (UA159) and a S mutans clinical strain. 35 specimens of polished bovine enamel (6mm- diameter, 2mm-height) were randomly distributed in the same treatment groups (n=5). The specimens were treated with the suspensions and then inserted into a plate containing sucrose, artificial saliva and a standard suspension of S. mutans to allow microorganisms adhesion and then colony forming units per ml (CFU/mL) counting was performed after 48 h. The antimicrobial effect on a newly formed and mature biofilms was also evaluated. For this, 35 blocks of bovine enamel were randomly distributed into the seven previously mentioned groups (n=5). The specimens were inserted into a plate containing sucrose, artificial saliva and a standard suspension of S. mutans to allow biofilm formation. After 4 h and 24 h of the initial formation of the biofilm, the specimens were treated with one of the toothpastes containing different concentrations of S-PRG and were return to the culture medium. After 48 h the CFU/mL counting were performed. Independent statistical analyses were performed for each study. Data were analysed with ANOVA and Tukey test (5%). The S-PRG containing toothpastes presented protective potential and the 30% S-PRG was the most effective, differing from the positive control (p<0.05). For remineralization, toothpastes containing S-PRG differed from the negative control and 0% S-PRG (p<0.05), but did not differ from each other and were not superior to toothpaste containing NaF (p>0.05). A significant decrease in the adhesion of microorganisms was observed for all groups treated with the S-PRG containing toothpastes and for the UA159 strain the 20 and 30% S-PRG toothpastes had a superior effect than the NaF+Triclosan (p<0.05). Antimicrobial effect on the newly formed biofilm (4 h) was also observed for the groups treated with S-PRG, but no greater effect was observed than that of NaF+Triclosan (p>0.05). For mature biofilm, antimicrobial effect of S-PRG toothpastes was observed only for the clinical strain (p<0.05), and were inferior than NaF+Triclosan toothpaste. It could be concluded that, toothpastes containing S-PRG presented higher efficacy in protecting enamel against demineralization and in promoting remineralization, as well as inhibiting the cariogenic biofilm developmen

Silicon-enriched hydroxyapatite formed induced by REFIX-based toothpaste on the enamel surface / Formação de hidroxiapatita enriquecida com silício induzida por dentifrício à base de REFIX na superfície do esmalte

Objetivo: Este estudo in vitro objetivou caracterizar o teor de minerais e a morfologia das partículas de um dentifrício fluoretado contendo tecnologia REFIX e o teor de minerais e a morfologia da superfície do esmalte tratada com este produto. Material e Métodos: Blocos de esmalte bovino (n=5) foram obtidos (4×4×6 mm), desmineralizados (lesão de cárie artificial) e tratados (ciclagem de pH e escovação com dentifrício). Durante a ciclagem de pH de 7 dias (desmineralização e remineralização levaram 6 h e 18 h, respectivamente), o esmalte foi escovado por 5 min com uma escova dental elétrica antes de ser imerso em uma solução de remineralização. Avaliou-se a micromorfologia e os níveis elementares (% em peso) dos íons presentes no dentifrício e na camada formada sobre o esmalte após o tratamento. A morfologia da superfície foi avaliada por meio de microscopia eletrônica de varredura (MEV). As análises elementares foram realizadas usando um espectrômetro de energia dispersiva de raios-X (EDS). Resultados: A análise por MEV do dentifrício demonstrou uma distribuição de tamanho uniforme de partículas de forma regular que foram organizados esparsamente em "nanoclusters". A análise elementar da formulação do dentifrício demonstrou a presença de Si (silício), Na (sódio), P (fósforo) e F (flúor), entre outros. Observou-se também uma camada mineral na superfície de esmalte com espessura uniforme consistente em torno de 14 µm. Conclusão: De acordo com os resultados, conclui-se que a tecnologia REFIX modifica a superfície e subsuperfície da estrutura do esmalte, formando uma camada mineral rica em silício. (AU)

Objective: This in vitro study aimed at characterizing the mineral content and filler particle morphology of a fluoridated toothpaste containing REFIX technology and the mineral content and the morphology of the enamel surface treated with this product. Material and Methods: Bovine enamel blocks (n=5) were obtained (4×4×6 mm), demineralized (artificial caries lesion), and treated (pH cycling and brushing with the toothpaste). During the pH cycling, which lasted for 7 days (demineralization and remineralization took 6 h and 18 h, respectively), the enamel was brushed for 5 min using an electric toothbrush before being immersed in a remineralization solution. We evaluated the micromorphology and elemental levels (wt%) of ions present in the toothpaste and on the layer formed over the enamel following the treatment. The surface morphology was assessed using scanning electron microscopy (SEM). The elemental analyses were performed using an energy-dispersive X-ray spectrometer (EDS). Results: Scanning electron micrographs of the toothpaste demonstrated a uniform size distribution of regular-shaped fillers sparsely organized in nanoclusters. Elemental analysis of the toothpaste's formulation demonstrated the presence of Si (silicon), Na (sodium), P (phosphorus), and F (fluorine), among others. We also detected a mineral layer that had formed on the treated enamel surface; the layer had a consistent uniform thickness of ~14 µm. Conclusion: Based on the results, it can be stated that REFIX technology modifies the surface and subsurface of the enamel structure, forming a Si-rich mineral layer. (AU)

Análise in vitro da capacidade de soluções contendo fluoreto e/ou hexametafosfato na remineralização da dentina / In vitro analysis of the capacity of solutions containing fluoride and/or hexametaphosphate on the remineralization of dentin

O objetivo do presente estudo foi avaliar a capacidade de soluções contendo HMP e F, sozinhos ou em associação, em induzir a remineralização dentinária em um protocolo in vitro. Blocos de dentina radicular bovina (4 × 6 cm, n = 100) foram preparados e submetidos à indução de lesões de cárie artificiais em dois terços da superfície; cada bloco foi utilizado como seu próprio controle. Em seguida, os blocos foram divididos em 10 grupos experimentais (n=10/grupo), de acordo com as soluções a serem testadas: (1) Placebo (sem F ou HMP); (2) 0,5% HMP; (3) 0,75% HMP; (4) 1% HMP; (5) 250 ppm F; (6) 500 ppm F; (7) 1100 ppm F; (8) 250 ppm F + 0,5% HMP; (9) 500 ppm F + 0,75% HMP e (10) 1100 ppm F + 1% HMP. Os blocos foram tratados por um minuto, duas vezes ao dia com as respectivas soluções, e submetidos a uma ciclagem de pH durante 7 dias. Em seguida, foram determinadas a porcentagem de recuperação da dureza de superfície (%RDS) e a área integrada da lesão de subsuperfície (ΔKHN). Os dados foram submetidos a ANOVA e teste de Fisher LSD (p<0.05). Uma relação dose-reposta foi observada entre as concentrações de F nas soluções sem HMP e as variáveis %RDS e ΔKHN; quanto às soluções contendo apenas HMP, uma relação dose-resposta foi observada somente para ΔKHN. Em relação à %RDS, os grupos placebo e 0,5% HMP, e os grupos 0,75% e 1% HMP não apresentaram diferenças significativas entre si. Quando associado ao F, o HMP aumentou a capacidade de remineralização da superfície e subsuperfície dentinária, visto que os grupos contendo F + HMP apresentaram resultados significativamente melhores em relação aos grupos contendo F sozinho. Em acréscimo, a solução contendo 250 ppm F + 0,5% HMP promoveu um efeito remineralizador semelhante à solução contendo 500 ppm F. Já em relação à ∆KHN, diferenças estatísticas foram observadas entre todos os grupos na área tratada, sem diferenças significativas quanto às áreas controle e desmineralizada. Os resultados permitem concluir que a adição de HMP às soluções fluoretadas potencializou o efeito destas sobre a remineralização das lesões artificiais de cárie em dentina, tanto na superfície quanto em profundidade(AU)

The present study aimed to investigate the ability of solutions containing HMP and F, alone or in association, in promoting dentin remineralization in an in vitro protocol. Bovine root dentin blocks (4 × 6 cm, n = 100) were prepared, and caries-like lesions were induced in two thirds of the surface; each block served as its own control. Then, blocks were divided into 10 experimental groups (n = 10 / group), according to the solutions to be tested: (1) Placebo (without F or HMP); (2) 0.5% HMP; (3) 0.75% HMP; (4) 1% HMP; (5) 250 ppm F; (6) 500 ppm F; (7) 1100 ppm F; (8) 250 ppm F + 0.5% HMP; (9) 500 ppm F + 0.75% HMP and (10) 1100 ppm F + 1% HMP. Specimens were treated for one minute, twice a day with the respective solutions, and subjected to a pH-cycling regime for 7 days. Next, the percentage of the superficial hardness recovery (%SHR) and integrated loss of subsurface hardness (ΔKHN) were determined. Data were submitted to ANOVA and Fisher LSD's test (p<0.05). A dose-response relationship was observed between F concentrations in solutions without HMP and the variables %SHR and ΔKHN; as for the solutions containing HMP alone, a dose-response relationship was only observed for ΔKHN. Regarding %SHR, no significant differences were observed Placebo and 0.5% HMP groups, nor between 0.75% and 1% HMP groups. When associated with F, HMP was shown to increase the remineralizing capacity of the solutions both at the surface and the subsurface of dentin specimens, since the groups containing F + HMP showed significantly superior results compared to groups containing F alone. In addition, the solution containing 250 ppm F + 0.5% HMP promoted a remineralizing effect similar to that containing 500 ppm F. Regarding ∆KHN, significant differences were observed among all groups in the treated area, while no significant differences were observed among the groups in the control and demineralized areas. The results allowed the conclusion that the addition of HMP to fluoridated solutions significantly enhanced their remineralizing potential on dentin artificial caries lesions, both at the surface and in depth(AU)

Efeito de dentifrício com alta concentração de flúor na remineralização e resistência de união de cimento de ionômero de vidro em substratos dentários com cárie artificial / Effect of dentifrice with high concentration of fluoride under remineralization and bond strength of glass ionomer cement on dental substrates with artificial caries

O objetivo do presente estudo foi avaliar a influência de diferentes dentifrícios na dureza de superfície, em secção transversal e perfil de desgaste do esmalte, assim como na resistência de união de cimentos de ionômero de vidro de alta viscosidade (CIV-AV) à dentina, após indução de cárie artificial, ciclagem de pH e escovação. Foram utilizados 80 dentes bovinos, divididos em blocos de esmalte e dentina. Os espécimes de esmalte foram polidos e selecionados de acordo com a microdureza. Em seguida, metade de cada bloco de esmalte foi protegida com verniz ácido resistente. Os espécimes de dentina foram incluídos em resina acrílica e planificados. O protocolo de cárie artificial foi feito através de ciclos de desmineralização em esmalte (n=20) e pela imersão da dentina (n=40) em solução desmineralizadora. Vinte amostras de dentina não foram submetidas à cárie, sendo o grupo controle. Todas as amostras foram submetidas à ciclagem de pH e escovação durante 7 dias de acordo com cada dentifrício: Colgate Total 12 1450 ppm F (CT) e Clinpro 5000 ppm F + TCP (CL). Em seguida, os blocos de esmalte foram submetidos às análises de dureza de superfície, em secção transversal e perfilometria. Microscopia eletrônica de varredura foi realizada em três blocos representativos de cada grupo. Os espécimes de dentina foram subdivididos de acordo com material restaurador: CIV-AV Ketac Molar (KM) e cimento ionomérico híbrido Equia Forte (EF). Em seguida, as amostras foram armazenadas sob umidade relativa durante 24 horas e preparados para o teste de microcisalhamento. Os dados obtidos foram submetidos ao teste de normalidade, análise de variância (ANOVA) 1 critério para avaliar a recuperação mineral e perfil de desgaste, ANOVA 2 critérios com medidas repetidas para avaliar a dureza de superfície e em secção transversal, ANOVA 3 critérios para avaliar o microcisalhamento e pós teste de Tukey para comparações múltiplas, com significância de 5%. Observou-se recuperação parcial da dureza de superfície, independente do dentifrício. Os dados da dureza em secção transversal evidenciaram que CL obteve valores inferiores a CT até 90 micrômetros (m) no lado teste. O dentifrício CT apresentou maior desgaste quando comparado à CL. Em dentina, ao comparar os dentifrícios dentro de cada CIV, CT apresentou maior resistência adesiva para ambos os materiais. A comparação entre CIVs dentro do mesmo dentifrício evidenciou resistência adesiva superior para KM quando comparado à EF na dentina tratada com CL. Conclui-se que o dentifrício com maior concentração de flúor promoveu menor dureza em secção transversal no esmalte e o dentifrício convencional resultou em maior desgaste superficial. Na superfície dentinária, o dentifrício com maior concentração de flúor diminuiu a resistência adesiva de cimentos de ionômero de vidro(AU)

The aim of the present study was to evaluate the influence of different dentifrices on surface hardness and cross-sectional hardness, wear profile on enamel, as well as on the bond strength of high viscosity glass ionomer cements (HV-GIC) to dentin, after to produce artificial caries, pH cycling and brushing. Eighty bovine teeth were used, divided into enamel and dentin blocks. The enamel specimens were polished and selected according to microhardness. Then, half of each enamel block was covered with resistant acid varnish. Dentin specimens were embedded in acrylic resin and flattened. The artificial caries protocol was carried out through enamel demineralization cycles (n= 20), and the dentin (n= 40) was immersed in demineralizing solution. Twenty dentin specimens were not subjected to artificial caries, being the control group. All blocks were subjected to pH cycling and brushing for 7 days according to each dentifrice: Colgate Total 12 1450 ppm F (CT) and Clinpro 5000 ppm F + TCP (CL). Then, the protected enamel surfaces were exposed for the analysis of surface hardness, cross sectional hardness and profilometry. Scanning electron microscopy was performed in three representative blocks of each group. The dentin specimens were subdivided according to restorative material: HVGIC Ketac Molar (KM), and hybrid GIC Equia Forte (EF). Then, the specimens were stored under relative humidity for 24 hours and prepared for the micro-shear test. The data were submitted to normality test, one-way analysis of variance (ANOVA) to assess mineral recovery and wear, two-way repeated measures ANOVA to assess surface and cross-sectional hardness, and three-way ANOVA to analyze the bond strength. Tukey post-test was used for multiple comparisons, with a significance level of 5%. It was observed a partial recovery of superficial microhardness, regardless of the dentifrice. Cross sectional hardness data showed that CL obtained values below CT up to 90 micrometers (m) on the test side. CT dentifrice presented greater wear when compared to CL. In dentin, when the dentifrices were compared within each GIC, CT showed greater adhesive resistance for both materials. A comparison between GICs within the same dentifrice showed superior adhesive resistance for KM when compared to EF in dentin treated with CL. It was concluded that the dentifrice with the highest fluoride concentration promoted less cross-sectional hardness in the enamel and the conventional dentifrice resulted in greater surface wear. On the dentin, the dentifrice with the highest fluoride concentration decreased the adhesive strength of glass ionomer cements(AU)

Análise comparativa de materiais bioativos: adesão bacteriana, alterações ópticas e capacidade remineralizante / Comparative analysis of bioactive restorative materials: bacterial adhesion, optical alteration and remineralizing capacity

Os objetivos deste estudo foram comparar três materiais bioativos a uma resina bulk fill convencional (controle), quanto à adesão bacteriana e alterações ópticas, quando expostos a solução corante e escovação simulada; como também, avaliar o esmalte adjacente a restaurações com esses materiais, quando submetidas ao envelhecimento térmico e a desafio cariogênico. Para determinação da adesão bacteriana (fase 1), foram confeccionadas 10 amostras de cada grupo: AB: Activa Bioactive Restorative (PulpdentTM Corporation, USA); BB: Beautifil Bulk (Shofu inc., Kyoto, Japan); EQ: Equia Forte (GC América Inc., Illinois, EUA) e FBC: Filtek Bulk Fill (3M ESPE, Saint Paul, Minessota, EUA 3M). Após a polimerização, as amostras foram armazenadas por 48h e então expostas a cepa padrão de Streptococcus mutans (UA 159) e determinado o número de unidades formadoras de colônia (UFC/ml). Foram então autoclavadas e submetidas diariamente a ciclos de pigmentação por café e escovação simulada, durante 30 dias, seguidos de uma segunda adesão bacteriana. Alterações de cor e translucidez foram avaliadas após esses ciclos. Os dados foram submetidos à ANOVA dois fatores e teste de Tukey (5%). Para avaliação do esmalte (fase 2), foram utilizadas as faces vestibulares e linguais de 50 terceiros molares humanos distribuídas aleatoriamente em 5 grupos (n=20): grupo EH: esmalte hígido (controle) e, 4 grupos que receberam preparos cavitários padronizados restaurados com os mesmos materiais utilizados na fase 1. Os espécimes foram expostos à termociclagem (10.000 ciclos) e desafio cariogênico. A microdureza do esmalte foi medida inicialmente, após termociclagem e após o desafio cariogênico. Os dados foram submetidos a ANOVA dois fatores de medidas repetidas e teste de Tukey (5%). Os resultados apresentaram diferenças estatisticamente significantes entre os grupos para as adesões bacterianas; sendo que na primeira, o grupo AB (6,2 log) apresentou o menor valor. Na segunda adesão, o grupo FBC manteve seu crescimento estável (7,5 log). Os grupos AB e EQ (9,4 e 9,2 log) apresentaram médias superiores as da primeira adesão (6,2 e 7,6 log respectivamente). O grupo BB (6,7 log) mostrou a menor adesão bacteriana. Diferenças na cor não foram estatisticamente significantes entre os grupos, no entanto, todos materiais mostraram alteração de cor perceptível (∆E> 2,7) após os ciclos de exposição ao café e escovação. A translucidez foi estatisticamente diferente entre os grupos, mas não foi influenciada pelos ciclos. A microdureza do esmalte diminuiu para todos os grupos após a termociclagem. Os grupos FBC e EH apresentaram as menores médias de microdureza (178,78/ 202,83 kgf); os grupos AB e BB (240,82/ 265,34 kgf), foram estatisticamente semelhantes; e o grupo EQ apresentou a maior média (274,18 kgf). Uma diminuição da microdureza aconteceu após o desafio cariogênico, exceto para o grupo EQ (244,73 kgf). Os grupos FBC e EH (117,18/ 112,97 kgf), não apresentaram diferenças estatísticas entre eles, com as menores médias de microdureza; e, os grupos BB e AB (211,32/ 171,14 kgf) apresentaram diferenças estatísticas em relação aos demais grupos. Podemos concluir que: os materiais bioativos interferiram na adesão bacteriana por Streptococcus mutans, e foram susceptíveis aos ciclos de pigmentação e escovação; a imersão no café e escovação simulada alteraram a cor, mas não a translucidez de todos os materiais; a termociclagem reduziu a dureza superficial do esmalte adjacente a todas as restaurações nesse estudo; e que, o desafio cariogêncio reduziu a dureza do esmalte exceto para o grupo EQ, que apresentou manutenção da sua dureza, mostrando seu potencial de influenciar a resistência do esmalte à desmineralização.

The aim of this study was to compare three bioactive materials to a conventional resin, regarding bacterial adhesion and optical changes, when exposed to dye solution and simulated brushing; as well as evaluate the enamel adjacent to restorations with these materials, when submitted to thermal aging and cariogenic challenge. To determine bacterial adhesion (phase 1), 10 samples of each material were prepared: AB: Activa Bioactive Restorative (Pulpdent™ Corporation, USA); BB: Beautifil Bulk (Shofu inc., Kyoto, Japan); EQ: Equia Forte (GC America Inc., Illinois, USA) and FBC: Filtek Bulk Fill (3M ESPE, Saint Paul, Minnesota, USA 3M). After 48 hours the samples were exposed to a standard strain of Streptococcus mutans (UA 159) and the number of colony forming units (CFU/ml) determined. They were then autoclaved and submitted daily to coffee pigmentation and simulated brushing cycles, for 30 days, followed by a second bacterial adhesion. Color and translucency changes were assessed after these cycles. Data were submitted to two-way ANOVA and Tukey test (5%). For enamel evaluation (phase 2), buccal and lingual surfaces of 50 human third molars were randomly distributed into 5 groups (n=20): EH group: sound enamel (control) and 4 groups that received standardized cavity preparations restored with the same materials in phase. Specimens were exposed to thermocycling (10,000 cycles) and cariogenic challenge. Enamel microhardness was measured initially, after thermocycling and after cariogenic challenge. Data were submitted to Two-way Repeated Measures ANOVA and Tukey test (5%). Bacterial adhesion results showed statistically significant differences among groups; in the first adhesion, AB group (6.2 log) presented the lowest bacterial growth. In the second one, group FBC maintained its growth (7.5 log). AB and EQ groups (9.3 log) presented higher growth than before the treatments (6.2 and 7.6 log respectively). BB group (6.7 log) showed the lowest bacterial adhesion. Color differences were not statistically significant among groups; however, noticeable color change (∆E> 2.7) was seen for all materials after the coffee and brushing cycles. Translucency was statistically different among the groups but was not influenced by the cycles. Enamel microhardness decreased for all groups after thermocycling. FBC group and EH group, showed the lowest microhardness averages (178.78/202.83 kgf); AB and BB groups (240.82/265.34 kgf) were statistically similar; and EQ group had the highest average (274.18 kgf). A decrease in microhardness occurred after the cariogenic challenge for all materials, except for the EQ group (244.73 kgf). FBC and EH groups (117.18/112.97 kgf) did not present statistical differences between them, showing the lowest microhardness averages; and, groups BB and AB (211.32/ 171.14 kgf), were statistically different to the other groups. We can conclude that: bioactive materials interfered with bacterial adhesion by Streptococcus mutans, and were susceptible to pigmentation and brushing cycles; immersion in coffee and simulated brushing changed color, but not translucency for all materials; thermocycling reduced surface hardness of the enamel adjacent to all restorations in this study; and that cariogenic challenge also reduced enamel hardness, except for the EQ group, which maintained its hardness, showing its potential to influence enamel resistance demineralization.

Tara Gum as a Controlled Delivery System of Fluoride in Toothpaste: In Vitro Enamel Remineralization Study

ABSTRACT Objective: To evaluate the remineralizing potential of a hydrocolloid-based, controlled fluoride-releasing system added to dentifrice formulas. Material and Methods: Sixty-five human enamel blocks were prepared and the surface microhardness (SH0) values were determined. The artificial caries lesions were induced and the demineralization surface microhardness (SH1) was evaluated. The blocks were randomly allocated into five groups (n = 13): (1) 100-TGF (100% NaF with Tara gum added); (2) 50-TGF (50% free NaF + 50% NaF with Tara gum added); (3) 100% TG (100% Tara gum without fluoride); (4) 100% NaF (positive control); and (5) placebo (without Tara gum and NaF). The blocks were submitted to 7 days pH cycling and treated with dentifrice slurries twice a day. Finally, surface hardness (SH2) was assessed and the percentage of surface hardness recovery (%SMHR) was calculated. Analysis of variance (ANOVA) followed by Bonferroni test was used for statistical analysis. Results: A positive %SMHR was found in the 100% NaF (5.07) and 50-TGF (0.64) groups, while the 100-TGF (-1.38), 100% TG (-3.88) and placebo (-0.52) did not undergo remineralization. Statistically significant differences were observed between 100% NaF and all the groups except for 50-TGF (p<0.05). Conclusion: The presence of hydrocolloid (Tara gum) promoted minimal remineralization when associated with NaF. In the applied model, Tara gum may have compromised remineralization, preventing free fluoride from acting effectively in the carious lesion.

Procedimientos libres de aerosol ante COVID-19 en odontología pediátrica / Aerosol-free procedures against COVID-19 in pediatric dentistry

A finales de 2019 se identificó el virus SARS-CoV-2 (por su significado en inglés Severe Acute Respiratory Syndrome Coronavirus 2) como agente etiológico de la COVID-19 (por su significado en inglés coronavirus disease 2019) en la ciudad de Wuhan, China. Debido a su rápida propagación al resto del mundo durante el primer trimestre del año 2020, la Organización Mundial de la Salud (OMS) la declaró pandemia mundial en marzo del mismo año. Por el potencial de contagio de COVID-19 se ha considerado que el entorno clínico en el que se desenvuelve la odontología puede ser de alto riesgo para el paciente, el odontólogo y sus asistentes si no se tienen las medidas de bioseguridad adecuadas. En un principio se vieron suspendidas las consultas regulares; sin embargo, al volver a la actividad laboral se han adaptado protocolos para el control de infecciones como reforzar el uso de barreras de protección y minimizar tratamientos que involucren aerosoles. La caries es uno de los principales motivos de consulta en la odontología pediátrica, por lo que en este escrito se sugieren algunos protocolos basados en la mínima invasión que prescinden de instrumental rotatorio para salvaguardar al paciente en riesgo de contagio, reduciendo el número de visitas y tiempo en consulta e incluso controlando algunos aspectos de salud bucal fuera de consulta clínica por medio de estrategias preventivas que pueden llevarse a cabo desde casa. Esto significa también mantener la tranquilidad por parte de los tutores del paciente ante la pandemia que se vive actualmente (AU)

At the end of 2019, the Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) was identified as the etiological agent of COVID-19 in the city of Wuhan China. Due to its rapid spread to the rest of the world during the first trimester of 2020, the WHO declared a global pandemic in March of the same year. Due to the contagion potential of COVID-19, it has been considered that the clinical environment in which dentistry operates may be in high risk for the patient if the appropriate biosafety measures are not taken, initially clinical practices were suspended. However, when returning to work, protocols have been adapted to the infection control procedures, reinforced the use of protective barriers, and minimize treatments that involve aerosols. Caries is one of the main reasons for consultation in Pediatric Dentistry, this article suggests some protocols based on minimal invasion that dispense with rotating instruments to safeguard the patient from the risk of contagion, reducing the number of visits and time in consultation and even controlling some aspects of the oral health outside the dental visit through preventive strategies that can be carried out from home. Modifications to Dental Home. This should include maintaining tranquility and calm on the part of the patient's tutors in the face of the pandemic that we are currently experiencing (AU)

Enamel subsurface caries-like lesions induced in human teeth by different solutions: a TMR analysis

Abstract This study assessed the effectiveness of models for developing subsurface caries lesions in vitro and verified mineral changes by transverse microradiography (TMR). Enamel blocks from permanent (n=5) and deciduous teeth (n=5) were submitted to lesion induction by immersion in demineralizing solutions during 96 h, followed by pH cycles of demineralization (de) and remineralization (re) for 10 days. Two de-/re solutions were tested. Demineralizing solution "A" was composed by 2.2 mM CaCl2, 2.2 mM KH2PO4, 0.05 M acetic acid, with pH 4.4 adjusted by 1 M KOH. Demineralizing solution "B" was composed by 2.2 mM CaCl2, 2.2 mM NaH2PO4, 0.05 M acetic acid and 0.25 ppmF, with pH 4.5 adjusted by 1M KOH. Solution "A" produced cavitated lesions in permanent teeth, whereas solution "B" led to subsurface lesions in deciduous teeth. Solution "B" was then tested in enamel blocks from permanent teeth (n=5) and subsurface lesions were obtained, so that solution "B" was employed for both substrates, and the blocks were treated with slurries of a fluoride dentifrice (1450 ppm F, as NaF, n=5) or a fluoride-free dentifrice (n=5). Solution "B" produced subsurface lesions in permanent and primary teeth of an average (±SD) depth of 88.4µm (±14.3) and 89.3µm (±15.8), respectively. TMR analysis demonstrated that lesions treated with fluoride-free dentifrice had significantly greater mineral loss. This study concluded that solution "B" developed subsurface lesions after pH cycling, and that mineral changes were successfully assessed by TMR.

Resumo Este estudo avaliou a efetividade de modelos para o desenvolvimento de lesões de cárie subsuperficiais in vitro e verificou alterações minerais por microradiografia transversal (TMR). Blocos de esmalte de dentes permanentes (n = 5) e decíduos (n = 5) foram submetidos à indução de lesão por imersão em soluções desmineralizadoras durante 96h, seguido de ciclos de pH de desmineralização e remineralização por 10 dias. Duas soluções des-/re foram testadas. A solução desmineralizadora "A" foi composta por 2,2 mM de CaCl2, 2,2 mM de KH2PO4, 0,05 M de ácido acético, com pH de 4,4 ajustado por 1 M de KOH. A solução desmineralizadora "B" foi composta por 2,2 mM de CaCl2, 2,2 mM de NaH2PO4, 0,05 M de ácido acético e 0,25 ppmF, com pH de 4,5 ajustado por 1 M de KOH. A solução "A" produziu lesões cavitadas em dentes permanentes, enquanto a solução "B" apresentou lesões subsuperficiais em dentes decíduos. Portanto, a solução "B" foi posteriormente usada em blocos de esmalte de dentes permanentes (n = 5) e lesões subsuperficiais foram obtidas. Portanto, a solução "B" foi empregada para ambos os substratos, sendo metade deles tratada com dentifrício fluoretado e a outra metade com dentifrício livre de flúor. A solução "B" produziu lesões subsuperficiais de cárie com profundidade de 88.4µm (14.3) em dentes permanentes e com 89.3 µm (15.8) em dentes decíduos e TMR demonstrou que lesões tratadas com dentifrício sem flúor tiveram maior perda mineral. Este estudo concluiu que a solução "B" desenvolveu lesões subsuperficiais após o ciclo de pH e as alterações minerais foram avaliadas com sucesso por TMR.

Comparative effect of calcium mesoporous silica versus calcium and/or fluoride products against dental erosion

Abstract The aim of this study was to compare the effects of a single application of a new calcium mesoporous silica nanoparticle (Ca2+-MSN) versus other calcium and/or fluoride products against dental erosion. Enamel blocks were half-covered and assigned to six groups (n = 10): Ca2+-MSNs; casein phosphopeptide-amorphous calcium phosphate mousse (CPP-ACP); CPP-ACP/F− (900 ppm F−); titanium tetrafluoride (TiF4 1%); sodium fluoride (NaF 1.36%); and Milli-Q® water (negative control). A single application for each product was completed on the exposed areas of the blocks and were submitted to an erosive challenge. Differences in volumetric roughness (Sa), and tooth structure loss (TSL) by use of three-dimensional noncontact optical profilometry were evaluate. Scanning electron microscopy (SEM) was performed. Analysis of variance and Tukey's test for Sa and the Kruskal-Wallis and Mann-Whitney U tests (p< 0.05) for TSL, respectively. Results: When evaluating Sa, all products presented differences in roughness when compared with the control group (p< 0.05) but not with each other (p > 0.05). However, when analyzing the TSL, it was observed that Ca2+-MSNs, TiF4, and NaF were more effective in preventing dental erosion versus CPP-ACP, CPP-ACP/F−, and Milli-Q® water (p< 0.05). In the SEM images, the negative control presented the worst loss of dental structure, with more porous enamel. Ca2+-MSNs were as effective as TiF4 and NaF to reduce the tooth structure loss.

Resumo O objetivo deste estudo foi comparar os efeitos de uma única aplicação de uma nova nanopartícula de sílica mesoporosa de cálcio (Ca2+ -MSN) versus outros produtos à base de cálcio e / ou fluoreto contra a erosão dentária. Blocos de esmalte foram parcialmente cobertos e distribuídos em seis grupos (n = 10): Ca2+ -MSNs; fosfopeptídeos de caseína/fosfato de cálcio amorfo (CPP-ACP); CPP-ACP / F- (900 ppm F-); tetrafluoreto de titânio (TiF4 1%); fluoreto de sódio (NaF 1,36%); e água Milli-Q® (controle negativo). Uma única aplicação para cada produto foi realizada nas áreas expostas dos blocos e submetida a desafio erosivo. Diferenças na rugosidade volumétrica (Sa) e na perda de estrutura dentária (TSL) por meio de perfilometria tridimensional de não contato foram avaliadas. Microscopia eletrônica de varredura (MEV) foi realizada. Foram realizadas análise de variância e teste de Tukey para os testes Sa e Kruskal-Wallis e Mann-Whitney (p<0,05) para TSL, respectivamente. Na avaliação de Sa, todos os produtos apresentaram diferenças de rugosidade quando comparados ao grupo controle (p<0,05), mas não entre si (p> 0,05). No entanto, ao analisar o TSL, observou-se que Ca2+ -MSNs, TiF4 e NaF foram mais eficazes na prevenção da erosão dental versus CPP-ACP, CPP-ACP / F- e Milli-Q® (p<0,05). Nas imagens de MEV, o controle negativo apresentou a pior perda de estrutura dentária, com o esmalte mais poroso. A Ca2+ -MSNs foi tão eficaz quanto o TiF4 e o NaF para reduzir a perda da estrutura dentária.